Read more: How to Jump-Start a Car<\/a><\/strong><\/p>\n It is always recommended to replace both headlights at the same time to ensure even lighting on the road. You can determine how many bulbs you need by looking at the headlights\u2014two clear bulbs on each side indicate that there are separate bulbs for high beams and low beams. Typically, the high beam bulb is located on the outside. Once you determine how many bulbs you need, head to the store and consult a sales associate on which bulbs work best for your vehicle, or do some research of your own.<\/p>\n Learn more: What Vehicle Problems are Illegal to Drive With in Texas?<\/a><\/strong><\/p>\n Make sure your car is parked and then pop the hood. Check out the owner\u2019s manual to find the back of the headlight and locate three wires coming from a plug shaped like a trapezoid. The plug is held in place by either a metal clip, screw cap, or plastic catch that must be removed by either pulling on it, unscrewing it, or pressing on a small lever while gently pulling. Once this step is complete, the plug will be in your hand.<\/p>\n After the wiring is out of the way, you can pull the bulb out by holding the base, then rotate the bulb to loosen it. Once it is out, use the cotton gloves to hold onto the new bulb and replace the old one. The new bulb can be damaged by the oil on your hands, so be cautious. Finally, hook the wiring onto the new light and tighten the cap. Before you go anywhere, turn on your vehicle and make sure both headlights work. Be sure to test the high beams as well.<\/p>\n Thank you for reading! Check out our blog<\/a> for more tips and tricks!<\/p>\n\n\nBuy New Headlight Bulbs<\/h3>\n
Find the Bulb Holder and Remove Wiring Harness
![\"Man](\"https:\/\/www.dealerfireblog.com\/thirdcoastautos\/wp-content\/uploads\/sites\/767\/2019\/11\/Man-in-hat-examining-headlight-with-tablet-in-hand_o-300x200.jpg\")
<\/a><\/h3>\nRemove and Replace the Bulb<\/h3>\n